Sterling Advanced Detachable Restrictor

Designed with safety and security in mind Securistyle’s Sterling Detachable Key release restrictor stay for use with Sterling and Storm Balanced heavy-duty hinges. An ideal choice for high-rise buildings.

The Sterling Advanced Detachable Restrictor has been approved by the New York City Department of Health (NYCDoH) for compliance with its falls program– testifying to its safety when used in high-rise commercial buildings such as office towers and hotels. 

Features

  • Can be used on top-hung and side-hung vents
  • The range includes 15.9mm and a 13mm bracket that has been designed to suit both standard and slim channels in aluminium profiles
  • Crack stop design for a positive stop
  • Suitable for 16mm-18mm hardware cavity
  • Unique locking pin design allowing simple detachment/engagement of the restrictor stay via a key for authorised release only
  • Detachable release key available (Key sold separately)
  • Non-handed product to reduce the stock inventory
  • Easy to fit with no routing required
  • Full Technical and Sales Support is available
  • Composite stainless steel and plastic slider for strength and maximum wear resistance
  • Austenitic 304 stainless steel for enhanced corrosion resistance
  • Suitable for use on Aluminium, PVCu, and Timber

Specifications

  • 12 Year mechanical guarantee
  • 12 year surface finish guarantee
  • Environmental Product Declaration available
  • Approved by the New York City Department of Health- (NYCDoH) for compliance with its falls programme accreditation no. HDLD #04-02-2010
  • Tested to EN13126-5 clause 5.7: Impact Testing –Grade 1 

Maintenance and Lubrication

  • As with most mechanical devices, Restrictor Stays require periodic maintenance and lubrication. The restrictor in general and particularly the pivots, sliding shoe and track must be kept free from dirt, debris and any obstructions at all times.
  • At Time of Installation - Lubricate all pivot points with light machine oil and wipe away excess, one drop per pivot is sufficient. We suggest one of the following lubricants or equivalent:
    • General light engineering oil with corrosion inhibitors such as Castrol Everyman or 3 in 1 oil (available in aerosol can for convenience).

Note: Solvent based aerosol sprays e.g. WD40 are not suitable for this application.

  • Every Five Years - Carry out the following checks every five years:
    • Clean any dirt or debris from the hinge and clear any obstructions from the pivots, sliding shoe and track.
    • Apply lubrication as instructed
    • Check the tightness and security of all fixing screws and rivets.